Description
(1). Input:
Battery:18V/20V
USB Type C: 5-15V/3A Or 20V/3.25A
(2). Output:
USB Type A:5V/3A
USB Type C: 5-15V/3A Or 20V/3.25A(65W MAX)
Battery Port:18V/20V 3A
(3). TYPE-C can reversely charge the connected battery, use the TYPE-C interface charging cable at home
(4). Protection circuit: over-discharge voltage 13.5-14V protection, short circuit protection.
Attention Please:
(1). Please use more than 60W power adapter to charge the battery, if you use a lower power adapter, slower charging will occur.
(2). Type-C can be used not only as an input but also an output, but USB can be only as an output.
(3). The screen represents the charge process of the battery’s capacity. When battery reaches full capacity, the screen will shows 100%.
(4). When finished, please disconnect the item from the battery.
(5). They can only Charge 18V/20V Li-ion battery, don’t charge 14.4V battery, otherwise, will be dangerous.
Package Includes:
1 * Battery Charger(Battery not included)
Note:
(1). Due to manual measurements and slight color variations, please allow 1-3 cm (0.4-1.18 inches) difference to suit different display settings.
(2). Due to the light and screen difference, the item’s color may be slightly different from the pictures. Please understand.
1. For Makita (UDCB094 – MK)
Type C interface connected to charger Charging the For Makita lithium battery
!!! Can only Charge 18V/20V Li-ion battery, don’t charge 14.4V battery, otherwise, will be dangerous.
UDCB094 – MK is suitable for the following 18V Li-ion batteries:
(A). For Makita 18V Li-ion Battery model:
BL1815, BL1815B, BL1820, BL1820B, BL1830, BL1830B, BL1840, BL1840B, BL1850, BL1850B, BL1860, BL1860B, BL1845, BL1890, BL1890B
as shown in the picture below:
(B). For HongSong / FoGo / BoDa / Lomvum / ZhiPu / JiangMi 18V lithium battery, as shown in the picture below:
(a) for Lomvum:
(b) for BODA: 48F/48V
(c) for YAGU: 48V/68V/88V/98VF
(d) for GMS:
(e) for PUANGD: 128TV/168TV/198TV
(f) for KETEW/KETEWEI: 12TVF/68TV/88TV/98TV/128TV/168TV/198TV
(g) for LMlava:
(h) for Jinlujiao:
(i) for ULITE: 98TV 128TV 168TV 198TV
(j) for Jinlujiao: 908T/928T/958T/978T/78V/98V/108V/128V
(k) for Jingmi:68VT/98TV/128TV/368TV
(l) for Hongsong:98TV/128TV/168TV/198TV
(m) for Zhipu:
(C). It is not suitable for the BL14xxG BL18xxG series lithium batteries, as shown in the picture below:
2. For DeWalt (UDCB094 – DW)
Type C interface connected to charger Charging the For DeWalt lithium battery
!!! Can only Charge 18V/20V Li-ion battery, don’t charge 14.4V battery, otherwise, will be dangerous.
3. For Milwaukee (UDCB094 – ML)
UDCB094 – ML is suitable for Milwaukee 18V Li-ion batteries:
ForM18 M18B M18B2 M18B4 M18BX
932 3520 71 / 4932 3526 67 / 49 32 4300 63 / 4932352002 / 4932352071
4932352667 / 4932430063 /C18 B /C18BX
as shown in the picture below:
Type C interface connected to charger Charging the For Milwaukee lithium battery
!!! Can only Charge 18V/20V Li-ion battery, don’t charge 14.4V battery, otherwise, will be dangerous.
It is not suitable for milwaukee ” V18, 48-11-2200 ” series lithium batteries, as shown in the figure below:
4. For Bosch (UDCB094 – BS)
Type C interface connected to charger Charging the For Bosch lithium battery
!!! Can only Charge 18V/20V Li-ion battery, don’t charge 14.4V battery, otherwise, will be dangerous.
It is only suitable for bat618 lithium batteries,notsuitable for “ALL 18V ” series lithium batteries(marked ” X ” ), as shown in the figure below:
Notes:
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.
Warm reminder (very important!!!):
1. There is no battery in the package!!!!!!
2. They Can only Charge 18V/20V Li-ion battery, don’t charge 14.4V battery, otherwise, will be dangerous!